LaboControle PowControl

Control the quality and collect accurate samples directly from the process in safety with the PowControl system

Applications: Powder Sampling

Based on the principle of the Archimedes screw, the PowControl allows representative samples of powders to be taken directly from the process in continuous or sequential mode from a gravity process line, from the wall of a silo or a reactor.
Used extensively in the chemical, pharmaceutical and food industries, PowControl in-line sampler allows representative, continuous, grab or composite sampling of free falling powders in a chute, or bulk powders in a filled vessel.
The frequency and duration of sampling can be programmed according to the individual process

The material used and the innovative solution provided for easy cleaning respond to the hygiene and safety principles required by the European Directive 93/68/CEE

This sampler is precision engineered and designed to comply with the inspection requirements of the pharmaceutical, food and chemical industries, in accordance with BPF, FDA, HACCP, ISO recommendations and procedures for good sampling practices.

Representative sampling from a chute or a filled vessel
Few wearable parts, and no ball-bearing
All parts in contact with the product are 316L stainless steel
Easy cleaning of the contact components
Sample can be collected in either sachets or bottles
ATEX versions available, classified to II 3D or 2D - zones 21 or 22 (dust)

LaboControle PowControl

LaboControle PowControl

© 2007 All Rights Reserved • YTRON-QUADRO (UK) LTD, Unit D, Chiltern Commerce Centre, 43 Asheridge Road, Chesham, Bucks, HP5 2PY